Anthony is booking same-day and next-day stove calls

Stove & Cooktop Repair in Toronto

Led by Master Technician Anthony — Red Seal Certified · 313A · TSSA · ODP Reviewed & fact-checked by Ivan, Red Seal #10-03535 Updated
Ivan's Red Seal #10-03535 interprovincial certificate
Reviewer's Red Seal #10-03535 interprovincial certificate

Burner stone cold on full power? Gas clicking endlessly without lighting? Number One Appliance Repair Toronto puts a Red Seal certified technician at your door same-day or next-day — radiant elements and infinite switches on the truck, gas igniters and valves handled under TSSA licensing, and a 90-day parts-and-labour warranty.

📞 Call (416) 639-9747 💬 Text a Photo of the Problem 📝 Book Online — 60 Seconds
🥇 Red Seal Certified 🔥 TSSA Gas Licence 🛡️ 90-Day Warranty 💵 $149.95 Flat Diagnostic

⭐⭐⭐⭐⭐ Rated 4.8/5 by 200+ GTA customers — Trustindex verified

Red Seal Certified Refrigeration 313A Licence TSSA Gas Licence ODP Certified WSIB Compliant $2M Commercial Liability

18+

Years on the tools

365

Days a year, 6:30am–11:30pm

14

Brand programs covered

90-day

Parts & labour warranty

Same-day stove and cooktop repair across Toronto and the GTA — Red Seal and TSSA-certified technicians, $149.95 flat diagnostic applied to the repair, and a 90-day parts-and-labour warranty.

Stove Down? Here's What Happens Next

Stove, cooktop, and range repair in Toronto by Number One Appliance Repair Toronto — radiant, induction, and gas, from builder-grade slide-ins to pro-style rangetops.

What should I do right now?

If you saw sparks or smelled burning plastic, cut the breaker and stop using the stove — that's arcing, and it doesn't heal. If you smell gas: shut the valve, open a window, and call immediately. A burner stuck blazing hot on "Low" is a fused switch — keep that circuit off until it's replaced.

What does stove repair cost?

A flat $149.95 diagnostic anywhere in the GTA: full teardown, multimeter testing of elements, switches, and boards, and a firm written quote — Diagnostic + OEM Parts + Labour = total. Proceed with the repair and the diagnostic fee is credited 100% toward it.

How fast can it be fixed?

Most cooktop repairs finish first visit — radiant elements, infinite switches, igniters, and terminal hardware ride on the van. Same-day and next-day windows run 365 days a year, and dinner-hour emergencies are exactly what the 6:30am–11:30pm phone line is for.

Inside the Diagnosis: How We Bring a Cooktop Back

Symptom → what's usually behind it

Element won't heat at all
A blistered radiant ribbon under the glass, a failed infinite switch behind the knob, or a burnt terminal connector. We lift the maintop, ohm-test the coils, and verify 240V output from the switch.
Blazing hot instantly, won't simmer
The infinite switch's contacts have welded shut, feeding the element constant 240V — a real fire hazard. The switch block is replaced and the dial range verified from simmer to full.
Induction flashing, ignoring pots
First the honest check: the pan must be flat and strongly magnetic. With proper cookware, we run board-level diagnostics on the generator modules — a shorted power transistor means the inverter module is replaced as an assembly.
Sparks or popping behind the stove
Arcing at the terminal block where the wall cord lands. Breaker off, then we rebuild the junction: burnt wire cut back to clean copper, new ring terminals, high-temperature ceramic connectors, every lug torqued and load-tested.
F10 / F30 on the display
The board believes the oven side is overheating. We measure the RTD sensor probe — about 1080 Ω at room temperature is healthy. A drifted probe is replaced; a truthful probe convicts the control board.
Touchpad dead or glitching
Steam from pots corrodes the keypad's ribbon traces behind the glass. We clean the contacts with electrical contact cleaner; a keypad still shorting gets a new membrane panel.

Gas work is licence work

Igniter ports, spark modules, and gas valve solenoids are serviced under Anthony's TSSA gas licence — Ontario regulates who may touch a gas valve because an incorrectly seated one is a house-fire risk, not a callback. That covers everything from a builder-grade range that clicks without lighting to Wolf's DSI spark modules and Thermador's star burners with their XLO simmer modules.

The glass-top policy, stated plainly

A cracked ceramic cooktop cannot be patched, glued, or "monitored" — boil-overs reach the live 240V elements beneath the crack. We order the exact OEM maintop frame for your model, transfer the burner boxes onto the new glass, and test insulation resistance before it cooks again. If the maintop costs more than the stove justifies, we'll say so at the diagnosis.

Repair or replace, the stove version

Stoves and cooktops run 13–15 years and sit among the most repairable appliances made: elements, switches, igniters, sensors, and even boards are all economical fixes for most of that life. The parts language you'll hear on site: radiant ribbon elements, infinite switches, the limiter that runs the hot-surface light, the RTD probe, the electronic oven control board, spark modules, and induction inverters.

Cooktop Fault Signatures We See Weekly

Codes and patterns, by brand — and the repair each one points to:

BrandSignalWhat it meansOur fix
Frigidaire / KenmoreF10 / F30Runaway-temperature readingOhm-test the RTD probe (~1080 Ω at room temp); replace probe or control board
SamsungSE (sensor error)Shorted keypad membraneClean the ribbon contacts; replace the membrane switch panel if still shorting
LG (gas)Clicks but no flameFouled igniter ports or failing valve solenoidClean the spark ports and caps; replace the solenoid under TSSA licensing
WolfContinuous clickingMoisture or grease in the DSI spark moduleClean the burner caps, replace the DSI module
ThermadorStar burner no simmerXLO simmer-control module faultClean the jet ports, replace the XLO module
Electrolux / BoschInduction ring flashingInverter or filter-board faultVerify cookware magnetism, then board-level diagnostics on the generator modules

Under the Glass

The radiant burner boxes, limiter switches, and wiring harness live under the maintop — where most cooktop faults are settled with an ohmmeter.

Stove opened for element and switch testing — appliance repair in Toronto, ON
Maintop lifted, coils ohm-tested, switch output verified — before any part is named.

Related Repairs & Service Areas

The cooking pair shares a chassis, and gas shares a licence — these pages go deeper.

📞 Call Anthony Now — (416) 639-9747

Open 6:30am–11:30pm, 365 days a year · or book online

Verified Toronto Repairs

Recent calls from the same dispatch program — more reviews on the main Toronto page.

"My oven was taking forever to heat up and cooking became frustrating. The appliance repair service was excellent and the problem was fixed efficiently. The technician was knowledgeable and courteous. Everything works perfectly now."

— Finnley Vance · Google review · oven repair

"My clothes dryer stopped working properly and clothes were coming out damp every time. The appliance repair was completed efficiently and without any hassle. The technician clearly knew what they were doing. Highly satisfied."

— Nathaniel Porter · Google review · dryer repair

Toronto Coverage by Postal Code

Same technicians, same flat $149.95 diagnostic, across every FSA we serve:

Downtown & Central:

M5C (HQ)M4PM5AM5BM5EM5GM5HM5JM5VM4WM4Y

North York:

M2JM2KM2LM2MM2NM2PM2RM3AM3H

Scarborough:

M1BM1CM1EM1GM1HM1JM1KM1MM1P

Etobicoke:

M8VM8WM8XM8YM8ZM9AM9BM9C

Not listed? We dispatch across the whole GTA — call (416) 639-9747.

Stove & Cooktop Repair FAQs

How much does it cost to diagnose a stove in Toronto?

A flat $149.95 anywhere in the GTA — the trip, a full electrical (or gas) teardown with multimeter testing, and a firm written quote. Proceed with the repair and the diagnostic fee is credited 100% toward it.

My gas burner keeps clicking but won't light. What's wrong?

Usually moisture or grease in the spark igniter ports, a weakened igniter, or a failing gas valve solenoid. We clean the ports and burner caps first; if the clicking continues, the spark module or valve is replaced — gas work done under Anthony's TSSA licence.

Do you repair induction and high-end gas cooktops?

Yes — induction inverter boards and generator modules on Bosch, Electrolux, Thermador, and Miele, and gas rangetops including Wolf's spark modules and Thermador's star burners. Board-level diagnostics come before any module is condemned.

My glass cooktop cracked. Can it be patched?

No — and don't keep cooking on it. Liquids can reach the live 240V elements beneath the crack. The glass can't be glued or patched; we order the exact OEM maintop for your model, transfer the burner boxes onto it, and verify insulation before it goes back into service.

I saw sparks behind my stove. What should I do?

Cut the breaker now and don't use the stove — arcing at the terminal block where the wall cord lands melts its way to a fire. We rebuild the power junction with new ring terminals and high-temperature ceramic connectors, and load-test every connection. These calls get priority routing.

Stove Diagnostic

$149.95

Our pricing model:
Diagnostic + OEM Parts + Labour = Total Cost

  • Diagnostic credited 100% toward repair
  • Firm quote provided before any repair
  • 90-day warranty on parts and labour
  • Complete teardown included
📞 Call Anthony — (416) 639-9747

Request a Stove Repair

Fastest option: call (416) 639-9747 — answered 6:30am–11:30pm daily. Prefer to type? Send your details and we'll call back to confirm a same-day or next-day window.

📞 We call you back to confirm your window — flat $149.95 diagnostic, credited 100% toward your repair.

By submitting, you agree to be contacted about your repair. See our privacy policy.

Looking for More Services or Information?

Our main Toronto page carries the full picture — all six repair services, 60 diagnostic protocols, 14 brand programs, transparent pricing, and the complete FAQ library.

Visit Our Main Toronto Page →

Request Received!

Thank you — your request is in. We'll call you shortly to confirm your repair window. Need it sooner? Call Anthony directly at (416) 639-9747, answered 6:30am–11:30pm daily.